Hilux / 1st gen 4x4 / 'Blue'

Gone but not forgotten!

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Chris » Sun May 16, 2010 3:16 pm

looks like I'll be adding a square tube driveshaft to the short list... :lol:



http://www.toyotaoffroad.com/Articles/P ... veline.htm
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Lumpy » Sun May 16, 2010 7:59 pm

Ok tib bit of info for you...All these are stock with not IFS lift.

88 pickup 23"
92 pickup 26"
95 4runner 23"

These are the measurements from flange to flange on the front d-shaft. Donno if this will help you or not.
92 Toyota Pickup
22re 268 cam 5spd
31x10.50
Rest stock for...now

95 4Runner
3.slow auto
(5spd someday, I have a donor truck)
Duplicolor floors
33X12.50 4.88's
LC Coils

Winslow
User avatar
Lumpy
FJORC Officer
 
Posts: 270
Joined: Sat Apr 24, 2010 8:59 pm

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Chris » Sun May 16, 2010 10:28 pm

Thanks buddy. I'm just going to build a square tube. It'll have the most range of use and it should be fairly straight forward to do. It'll have about 7 inches of compression and 11 inches of extension.. plenty. :)


Going to pick up some square tube tomorrow and go to town on it.

http://www.toyotaoffroad.com/Articles/P ... veline.htm


That's good info on the length you posted. Thanks for that.
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Chris » Mon May 24, 2010 1:01 am

ok up next.... Hilux goes in for surgery.. comes out with-

    Some sort of springs...
    New Bilstein shocks
    New IFS 4pot brake calipers & vented rotors

and...



4.88 3rds with ARB front and Detroit rear. :twisted:



Yep, it should work a bit different.
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Lumpy » Mon May 24, 2010 2:45 pm

Wow, that's quite a list...Good deal man!!!
92 Toyota Pickup
22re 268 cam 5spd
31x10.50
Rest stock for...now

95 4Runner
3.slow auto
(5spd someday, I have a donor truck)
Duplicolor floors
33X12.50 4.88's
LC Coils

Winslow
User avatar
Lumpy
FJORC Officer
 
Posts: 270
Joined: Sat Apr 24, 2010 8:59 pm

Re: Hilux / 1st gen 4x4 / 'General Tsuchia's War Machine'

Postby Chris » Mon May 24, 2010 4:52 pm

I bought the brake setup back in March. Never installed it. Great deal from Marlin Crawler- $199 for 4pot calipers (OEM), vented rotors and pads.


The suspension as you know I've been putting off until I had made up my mind on specs. Now with finding the 3rd member deal from some guy up in Michigan- I may as well just do it all at the same time.

Should finish off the truck. Not much else I want to do except a crawl box. Then I can go back to breaking it again. :)
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'Blue'

Postby Chris » Tue Jun 08, 2010 2:40 am

With the arrival of 'Red' coming this week; Blue will be going into the garage and up on the lift for new 3rd members (geared and locked), new front brake setup and new suspension setup.

Details and pics of the build will be posted from here on out. I will probably get started on this July 1st.
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'Blue'

Postby Chris » Wed Jun 09, 2010 5:10 pm

picked up a set of Downey rear springs today!! WOOT! :D Stamped good 'ol "Made in Japan".

now if I can find something to put up front.. maybe some stock rear springs.. which I don't have right now. :evil:
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'Blue'

Postby Chris » Fri Jun 18, 2010 10:15 pm

I believe the Downey springs I picked up are 3". They are a rear set from a 4Runner, so perhaps I'll get a bit more.. or maybe they'll be all saggy and give me less than 3".. we'll find out soon. Going to source a 3" front leaf pack to match. Not sure what yet.

3rds are clean and ready for install. It'll be nice to have some gearing underneath this thing.


Gotta get the Land Cruiser fixed, change the oil in the Echo, and maybe put a water pump in the "Green car" (rally rental). Then Blue can go in the garage and up on the lift. Probably start working on this around the first of July. We'll see..
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

Re: Hilux / 1st gen 4x4 / 'Blue'

Postby Chris » Tue Aug 17, 2010 9:35 am

Well. Blue is still Blue. Still haven't found much info on these Downey leafs I picked up. Going to probably score a set of TG leafs for the time being and get the truck back on the dirt. I'll most likely park Blue when the snow falls so I won't have many more months this year to enjoy it. It's either I get it done now or hold off and do it over the winter. Hrmm..


All in all I'm super stoked to have this truck. it just keeps getting better and better. Every time I look at it I'm surprised I found it in such good shape.


Wish I could say the same for Red and it's fate.. :lol: No rust or anything.. Just isn't going to get pampered.
User avatar
Chris
El Presidente
 
Posts: 1097
Joined: Sat Apr 24, 2010 9:12 am
Location: New Castle

PreviousNext

Return to Blast from the Past

Who is online

Users browsing this forum: No registered users and 1 guest

cron